Initial tests shows it successfully handling 2 disks as a disk dock should.
It says cloning is an offline process but I tried it online anyway. I put a smaller 120g 2.5” ssd (Win 7 installation, data size=40g approx) in slot A and took a spare 500g 3.5” disk that was formatted & contained some unneeded test data in slot B. Disk Mgr showed both disk details appropriately. I then held the Copy button 3 seconds (until I seen lights flicker) and then pressed it again quick and the copy commenced and Disk Mgr removed the disks. The progress lights on the device lit showing percentages go from 25, eventually to 100%. Approx.. 20 mins later it beeped 3 times and was finished. Disk Mgr then shows the ssd came back online intact and the harddisk appeared offline with the same partitions; 100mb Reserved, a 119g data partition (just like the original disk) and the rest (347g) shows Unallocated, AS EXPECTED! I right-clicked the offline harddisk to bring online and all files were intact as well (Win 7 installation, data size=40g approx).
I then placed the newly copied harddisk into the machine that the original ssd OS was installed on and it booted and was Win validated just fine. Works as expected, very painless and simple!
|أبعاد الشحنة||20.09 x 15.19 x 7.29 سم; 540 جرامات|
|مرجع الشركة المصنعة||778197362408|
|هل البطاريات مشمولة||لا|